MACHINE FOR PROCESSING DEEP HOLES MODEL KZH1910.05
The KZ1910.05 machine tool is designed for machining deep holes by drilling (solid and ring) and boring in products such as shafts and cylinders.
The following operations can be performed on the machine:
a) solid and ring drilling
b) boring.
BASIC DATA AND TECHNICAL CHARACTERISTICS OF THE MACHINE
| № | Name of characteristics | Unit of measurement | Meaning |
|---|---|---|---|
| 1. | Height of centres | mm | 670 |
| 2. | The largest diameter of the product installed above the frame | mm | 1300 |
| 3. | Range of diameters of products clamped in the faceplate | mm | 100-1000 |
| 4. | Range of diameters of products installed: | ||
| – in an open bezel | mm | 400-900 | |
| – in a closed lunette | mm | 200-630 | |
| – in a ring lunette | mm | 250-500 | |
| 5. | Range of lengths of products processed on the machine | mm | 1500-5000 |
| 6. | The maximum weight of the product processed using: | ||
| – two open lunettes | kg | 25000 | |
| – two closed lunettes | kg | 16000 | |
| – ring bezel | kg | 25000 | |
| 7. | Limits of the diameters of the holes to be machined: | ||
| – solid drilling | mm | 80-130 | |
| – ring drilling | mm | 80-450 | |
| – boring | mm | До 800 | |
| 8. | Spindle rotation frequency limits of the product | rpm | 2-200 |
| 9. | Diameter of the hole in the spindle | mm | 700 |
| 10. | Spindle rotation frequency limits | rpm | 20-320 |
| 11. | Limits of tool feed (stem) | mm/min | 0,5-1500 |
| 12. | The greatest effort in serving | kg | 8000 |